Fall and Winter Sale!
$100 on any Desktop computer Code - DSK2019

$50 off any Laptop Code - NB2019
Add discount code in shopping cart (Can be combined with other discounts!)

Presonus Tremblor T10

10-inch Active Studio Subwoofer
Manufacturer: Presonus
SKU: Tremblor T10
GTIN: 673454002687
$429.95

A solid foundation for mixing.

Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Features

Main components

  • 10-inch, front-firing, glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • Ground-lift switch

Power and safety

  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second Temblor® T10

Technical Specifications

Inputs

 
 

2- Balanced XLR

2- Balanced ¼” TRS

2- Unbalanced RCA

Outputs

 
 

2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼” TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)

Performance

 
Frequency Response 20 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >98 dB (A weighted)
THD 0.019% @ power <160W
Amplifier Power 250W peak, 170W RMS
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10” glass-composite, front-firing
Acoustic Port Front-firing bass reflex

User Controls

 
Input Gain Range -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
Ground Lift Switch On/Off
High Pass Filter Switch On/Off
Bypass Footswitch On/Off

Protection

 
 

RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

Power

 
  100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

 
  Vinyl-laminated MDF

Physical

 
Width 12.6” (320 mm)
Depth 15.75” (400 mm)
Height 15.75” (400 mm)
Weight 39.46 lbs (17.9 kg)

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.

 

A solid foundation for mixing.

Powerful and musical, Temblor® T10 active, front-firing subwoofers are designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. This ensures that Temblor-series subwoofers complement full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.

Features

Main components

  • 10-inch, front-firing, glass-composite low-frequency transducer
  • Front-firing, bass-reflex acoustic port

Controls and filters

  • Input gain control (-30 dB to +6 dB, continuously variable)
  • Continuously variable lowpass filter (50 Hz to 130 Hz)
  • Built-in crossover
  • Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
  • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
  • Polarity invert
  • Ground-lift switch

Power and safety

  • 250 watt, Class AB amplification
  • Internal damping and heat sink
  • Integrated rubber feet for stable placement

Inputs and outputs

  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
  • Left and right balanced XLR and ¼” TRS outputs
  • XLR subwoofer output for connecting a second Temblor® T10

Technical Specifications

Inputs

 
 

2- Balanced XLR

2- Balanced ¼” TRS

2- Unbalanced RCA

Outputs

 
 

2- Balanced XLR (full range with 80 Hz HPF option)

2- Balanced ¼” TRS (full range with 80 Hz HPF option)

1- Balanced XLR (Sub Out)

Performance

 
Frequency Response 20 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >98 dB (A weighted)
THD 0.019% @ power <160W
Amplifier Power 250W peak, 170W RMS
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10” glass-composite, front-firing
Acoustic Port Front-firing bass reflex

User Controls

 
Input Gain Range -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
Ground Lift Switch On/Off
High Pass Filter Switch On/Off
Bypass Footswitch On/Off

Protection

 
 

RF interference

Output-current limiting

Over-temperature

Turn-on/off transient

Subsonic filter

External mains fuse

Power

 
  100-120V ~50/60 Hz or 220-240V ~50/60 Hz

Cabinet

 
  Vinyl-laminated MDF

Physical

 
Width 12.6” (320 mm)
Depth 15.75” (400 mm)
Height 15.75” (400 mm)
Weight 39.46 lbs (17.9 kg)

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.