MICROPHONE PREAMPLIFIERS:
(measured to insert send)
| MIC GAIN: | -10 to +60dB (-10dB Pad) |
| LINE GAIN: | -16 to +44dB (-10dB Pad)* |
| PHANTOM POWER: | 48v +/-4v @ 10mA/Channel |
| MIC EIN: | <-127.5dBu |
| CMRR: | >80dB @ 100 to 10kHz |
| MAXIMUM INPUT LEVEL: | +22dBu (+32dBu with Pad) |
| INPUT IMPEDANCE: | Mic LO: 220Ω Balanced
Mic MED: 1k2Ω Balanced
Mic HI: 2k8Ω Balanced
Line (All Z): >6kΩ Balanced |
| FREQUENCY RESPONSE: | +/-0.5dB 10Hz to 100kHz |
| CROSSTALK: | <-85dBu @ 1kHz & 10kHz |
| THD+N @ 0dBu (1kHz): | 0.003% (-90.5dBu) |
| SNR: | >90dB |
| HPF: | Sweepable from 25Hz to 250 Hz, 2nd Order (12dB/Octave) |
| XLR: | Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) |
| 1/4” JACK: | TIP (Hot), RING (Cold) & SLEEVE (Shield) |
* Line input level at the combi jacks will be affected by the input impedance switch position, this can be used as a second pad control to adjust line input ranges on all channels.
DISCRETE JFET D.I (Channels 1 & 2):
(measured to line outputs / insert send)
| D.I GAIN: | -10 to +60 dB (-10dB Pad) |
| MAXIMUM INPUT LEVEL: | +16dBu (typical), +22dBu |
| INPUT IMPEDANCE: | 1MegΩ Unbalanced |
| FREQUENCY RESPONSE: | +/-0.5dB 10Hz to 50kHz |
| THD+N @ 0dBu (1kHz): | <0.03% (-70dBu) |
| SNR: | 89dB |
| 1/4” JACK: | TIP (Hot) & SLEEVE (Shield) |
LINE OUTPUTS (Insert Sends):
| MAXIMUM OUTPUT LEVEL: | +27.5dBu |
| OUTPUT IMPEDANCE: | <100Ω Balanced |
ADC LINE INPUTS (Insert Returns):
(measured at optical output under AES-17)
| MAXIMUM INPUT LEVEL: | +18dBu |
| DIGITAL REFERENCE LEVEL: | 0dBFS = +18dBu |
| INPUT IMPEDANCE: | >10kΩ Balanced |
| FREQUENCY RESPONSE: | +/-0.5dB 10Hz to Fs/2 |
| CROSSTALK: | <-80dBu @ 1kHz & 10kHz |
| THD+N @ -1dBFS (1kHz): | <0.002% (-94dB) |
| THD+N @ -6dBFS (1kHz): | <0.002% (-94dB) |
| DYNAMIC RANGE: | 113dB un-weighted 115dB A-weighted |
| PEAK LED LINEUP: | +16dBu (-2dBFS) |
| SIGNAL LED LINEUP: | Variable Brightness from -30dBu to -10dBu (-28dBFS) |
DIGITAL i/o:
| ADAT 8 CHANNELS SMUX: | 44.1 - 96kHz |
| AES | S/PDIF 8 CHANNELS: | 44.1 - 96kHz |
| CLOCK | Internal or External |
| WORLDCLOCK INPUT | 75Ω BNC Optional 75Ω Termination |
POWER SUPPLY:
- High stability, low noise internal SMPS
- Fanless, quiet operation
- Works anywhere in the world without reconfiguring
| LINE VOLTAGES: | 90 to 264V (a.c) |
| INTERNAL RAILS: | +/-18VDC, +48VDC & +5VDC |
| FUSE: | T1A (1Amp Time Delay) |
| CONSUMPTION: | Maximum 40 Watts |
WEIGHT:
4.0kg
